PHILIPS PE1542 / 60 / # T W2D 8912

Description

Welcome
at company auctions
PatKor Shop
In this auction we offer:
I offer you a professional laboratory power supply from Philips.
The device is of the PE1542 / 60 type.
The power supply has been designed for the military, laboratory and industrial applications.
It has 3 independent channels.
2 channels have regulated and stabilized voltage and current.
Channel 3 only has an adjustable output current.
The device was designed at the end of the 1980s without any compromises, so as to meet the highest possible standards of laboratory equipment.
This power supply has a high degree of stabilization, good accuracy with fast load changes, and very low internal resistance. Efforts were also made to ensure that it had good parameters in the current stabilization mode (current source).
Each of the stabilizers works in a linear system with the full output voltage of the transformer> - dimensions 36x21x15 cm
The offered power supply has been designed with a very large reserve of power, as it was intended for continuous operation. The manufacturer gives the maximum power of the device as 285VA. It houses a transformer with an overall power of 350W.
This is due to the fact that the power supply is adapted to work at + 40 ° C without any fans (two 2N3055 transistors work in parallel in the end stage of each channel).
According to one of our clients, after alterations, 4A can be downloaded from each channel without any problems.
However, this requires system changes and the rescaling of the ammeters.
The offered power supply was produced for the army.
It is in very good technical condition.
It has been regularly tested and calibrated.
The power supplies were a reserve and were stored in hermetic packages (shown in the photo), because they were practically one of the few power supplies to work without any problems with high levels of interference from the mains as well as with strong RF fields. (the stabilizer system was not excited).
The power supply is also not afraid (of course within a reasonable range) of high voltage pulses fed to the power outputs.
All offered power supplies have been tested and are functional.
The accuracy of the gauges has also been tested.
I assess the technical and mechanical condition of the power supply as perfect.
May only have slight scratches on the case from calibration labels or from storage.
Along with the power supply, you are bidding on operating and service manuals with diagrams in paper form.
.
Condition: Used
Invoice: I'm issuing a VAT invoice
Brand: Philips
Model: PE1542 / 60
Manufacturer's code: None
About us
PatKor Shop
sells on 3 ebay accounts
Patkor1
Patkor2
Patkor3
important information!
Please make sure you have read the following
to avoid
misunderstanding
when purchasing and shipping.
Shipment
We ship from Poland.
We ship to worldwide.
We offer standard shipping on this listing.
If express delivery is required
Write to us .
If you want a cheaper shipment -
Write to us .
If your country
not in the shipping list
Write to us
we will quote shipping for you.
Due to the international transaction
the parcel arrival time depends
from weather conditions,
pandemic, customs policy, public holidays etc.
If you have any other questions - write to us.
Returns
We accept returns as per ebay's terms and conditions.
If you are not satisfied with the product
Write to us .
WELCOME TO OUR OTHER AUCTIONS