Heating Pad Thermostat Heater Control Temp Control Aquarium Turtles Snake Lizard

Description

Inkbird Frezeer Thermometer Digital Temperature Controller Thermostat ITC-308S
Description:
1.US Sockets:
Plug the heater/cooler in sockets at the Inkbird temperature controller, set your desired temperature and you're done.
2.Removeable Temperature Sensor:
The temperature probe is waterproof and made of food-grade material, please rest assured to use it in food-making such as homebrewing,
and biltong making.
3.Outlets Thermostat Control:
Heating Cooling Dual Output & Delay Protection(High/Low-Temperature Alarm)
4.Widely Used:
The Inkbird digital thermostat is Ideal for homebrewing, fermentation, beer/wine storage, greenhouse heater,
tube heater, aquarium heater, heat mat, and reptile vivarium.
Features:
-Plug and play design, easy to use;
-Dual relay output, be able to connect with refrigeration and heating equipment at the same time;
-Support reading with Centigrade or Fahrenheit unit;
-Maximum output load: 1100W(110V);
-Dual display window, be able to display measured temperature and set temperature at the same time;
-Compressor delay protection for refrigeration control
-High and low-temperature alarms are available;
-Over-temperature and sensor fault alarm
-Temperature calibration;
-Heating/Cooling differential function could be set separately for refrigeration and heating
to protect the temperature controller from violent change.
Specification
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F
Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Dimension Body: 140x68x33mm (5.5x2.7x1.3inch)
Socket: 85x42x24mm(3.3x1.7x1inch)
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Package Content:
1x ITC 308S Temperature Controller;
1x Removeable NTC Sensor
1x Manual
1x Warranty card