-40%

Aquarium Chiller 42gal 1/10 HP Hydroponics Water Chiller for Fish Axolotl Coral

$ 121.96

Availability: 61 in stock
  • Water Type: All Water Types
  • Tank Capacity: 42 gal.
  • Brand: Rocita
  • Refrigerant: R134a
  • Model: AL-160
  • 🔥🔥🔥Special Features 1: Premium Refrigeration Compressor
  • 🔥🔥🔥Special Features 3: Low-Noise Cooling Work
  • GW: About 28.66lbs
  • Type: Aquarium Water Chiller
  • Rated Frequency: 60Hz
  • The Cooling Water: ≤160L
  • MPN: 2I133616LM61W3762
  • The Rated Voltage: AC 110V
  • 🔥🔥🔥Special Features 4: Tolerance Setting
  • 🔥🔥🔥Special Features 5: Cooling Effect
  • Power: 1/10HP
  • Condition: New
  • 🔥🔥🔥Special Features 2: Built-In Fans for Fast Cooling

    Description

    Aquarium Chiller 42gal 1/10 HP Hydroponics Water Chiller for Fish Axolotl Coral
    The Aquarium Water Chiller Brief Introductions:
    🔔【
    Premium Refrigeration Compressor

    The compressor adopts r134a refrigerant, circulating cooling, environmental protection, and pollution-free. The temperature of the chiller can be controlled at 68℉-79℉ (20℃-26℃), allowing your plants to grow more luxuriantly and axolotl more freely. It also uses a corrosion-resistant pure titanium pump, which can achieve the best between fresh water and seawater.
    🔔

    Built-In Fans for Fast Cooling

    2 cooling fans are designed to dissipate heat in time, increase the service life of the compressor and save electricity, and better take care of your chiller. In addition, there are a large number of cooling vents on the 2 sides of the chiller to speed up heat dissipation to keep the water in the fish tank always cool. So leave 6 inches/15 cm of space around the chiller to ensure good air circulation.
    🔔【
    Low-Noise Cooling Work

    The special noise-reduction design makes the compressor run very quietly, the low-noise operation will not affect your daily work and rest. And monitors the water temperature in real-time, when the water temperature is higher than the starting temperature, the chiller automatically runs to cool down. After power off and restarting, the chiller will continue to cool according to the original set temperature.
    🔔

    Tolerance Setting

    Every chiller has a tolerance value setting (F1) of 1-60. For example, I set the starting temperature to 79°F and the tolerance value to 2, then when the chiller detects that the temperature of the chiller’s water is 79°F, the chiller will automatically run and cool down until the water temperature is 77°F. Repeat cycle to cool down.
    🔔【
    Cooling Effect

    The cooling temp is affected by the ambient temp and the size of the fish tank. For example, the room temp is 77℉, using AL-160, the water with a capacity of 150L can drop to75-78℉. For 35 gal/132L is almost down to 73℉and if you want to drop below 68F, the water volume is recommended to be below 80L. If you want to achieve a better cooling effect, it is recommended to choose a larger model AL-300.
    About 42gal Aquarium Water Chiller
    Built-in high-efficiency energy-saving compressor, using R134a Refrigerant, no pollution while rapid cooling
    Precise real-time temperature control, equipped with smart controller to monitor water temperature accurately, maintaining a constant and stale water temp
    Low energy consumption and low noise, buit-in silent fan, less than 60dB while with rapid cooling and well heat dissipation capability
    Clear temperature display and easy adjustment, led screen for monitoring and adjusting the temp conveniently
    The proper temperature is the prerequisite for the reproduction of aquatic organisms. Our chiller is ideal for adjusting the water temperature.
    🔔 Cooling Fans & Vents Design
    The cooling fan and side vents are designed to dissipate heat in time, which can better maintain the chiller, save electricity and time, and keep the water in the fish tank always cool.
    🔔 Pure Titanium Water Pump
    Corrosion-resistant can be used in fresh water and seawater, with a water delivery capacity of 600L per hour.
    Please heck and clean the water pump monthly to to make sure the water
    🔔 One-Button Switch
    One-button switch design can easily and conveniently control the operation of the machine, you can choose to use or end according to actual needs.
    Power-on delay is 2-3 minutes, please wait patiently for COOL to long light
    ✔️
    Cool:
    Flashing: turning on, Long light : working, Light off: work off
    ✔️
    Set:
    Stop temp set ; Tolerance set F1 ; Calibration set F2
    ✔️
    Rst:
    Save and Return to the menu ( Displays current temp of the water tank )
    2 Connection Methods
    Perfect for Hydroponics and Aquariums Water Cooling System
    Well Maintain Your Water Tank at 65-80F
    Aquarium chiller is a necessity for your fish tank or hydroponic system, which can effectively provide your fishes, vegetables or fruits with a high-quality, cool and comfortable living environment
    UPGRADED TEMP CONTROLLER makes temp control more accurate
    NO FREON ensures no emissions (R134a refrigerant)
    COMPRESSOR COOLING for faster and greater cooling
    ANTI-CORROSIVE PURE TITANIUM EVAPORATOR ensures using in freshwater and sea water, durable, long service life
    Stable cooling effect
    Let your fish be at ease
    Let your hydroponics roots be healthy enough
    Wide Range Of Applications
    Attention for Use
    1. A lot of heat is generated around the chiller?
    The compressor will release a certain amount of heat during the cooling process, so we need to leave enough space for the chiller to dissipate heat. The heat generation means that the compressor is working normally.
    2. Chiller is not cooling?
    Please note that only when the water circulation is normal, the chiller can effectively cooling water.
    If no circulation: the pump is placed too high, causing the water flow pressure to be too high or the pump is broken, we can resend the pump if is broken.
    Good heat dissipation is the key to ensuring effective cooling. Please leave at least 6 inch /15cm of space for enough heat dissipation.
    3. The temperature displayed on the screen is inconsistent with the water temperature measured by other thermometers?
    The influence of external factors: such as the lights in the fish tank.
    The temperature measurement position is wrong: because the chiller detects the overall water temperature of the fish tank, the customer’s own thermometer measures the water temperature at a certain measurement location.
    The controller is wrong: consider temperature calibration F2
    4. Temperature fluctuation?
    If there is a temperature fluctuation problem, please pay attention to it at all times and record the corresponding video so that we can solve the problem for you.
    Test Your Chiller Before Connecting to Aquariums
    Please check the pipe connection if leakage:
    Put the pump and pipe in a bucket with water, and put the chiller in the a tub without water
    Power up the chiller, run for a while, and check for leaks
    If the chiller has no leak and everything works great, install it where you need it
    Why does the chiller leak?
    Incorrect pipe installation: check the pipe connection, pay attention to the sealing rings
    Long-term use which may cause the water pipe connection to become loose or larger, and water leakage may occasionally occur: try to add some vacuum grease to the pipe
    NOTE:
    If any accessories are missing or the manual is missing, please let us know and we will resend it for you as soon as possible.
    Payment
    Delivery details
    Terms of sales
    About us
    Contact us
    Payment
    We accept
    Credit cards、Debit card、Apple Pay、Google Pay、PayPal ect.
    payment.
    All major credit cards are accepted through secure payment processor PayPal.
    Payment must be received within 3 days of auction closing.
    When buying multiple items, please use the eBay shopping cart and check out once for all the items instead of paying for them individually.When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review.
    Please Note
    Import duties,taxes and charges are not included in the item price or shipping charges.These charges are the buyer's responsibility.
    Please check with your country's customs office to determine what these additional costs will be prior to bidding /buying.
    These charges are normally collected by the delivering freight (shipping) company or when you pick the item up – do not confuse them for additional shipping charges.
    We are not responsible for custom duties and related taxes. Orders will be shipped as a gift or as a sample. In general, no custom duties and tax will be charged.
    Delivery details
    The default shipping method is via
    UPS or USPS
    which will take about
    2-6 business Days
    in transmit for the hot season is coming. Please kindly be patiently wait for your order.
    We will ship according to your EBAY address but sorry that we
    can not accept P.O.BOX address.
    Please make sure it’s correct and include
    phone number via PayPal when you make payment
    .
    This will help your product to be received safely and quickly! And we are not responsible for order's delay or miss because of your incomplete contact information.If you need to change your address, Please change it in PayPal first before you pay.
    Items are generally shipped out
    within next 2 business days after payment has been verified
    .
    All items are shipped by
    Standard Registered Airmail
    .
    Terms of sales
    2 months free repair for the devices.
    Items should be returned on buyers’ cost for repair or replacement.
    Please contact us firstly when you need warranty service.
    In case an item arrives faulty, please contact us in 30 days and keep it unused.
    We will instruct you on how to return and get refund or replacement.
    If after 30 days, or the item has been used, we have the right to decline your claim.
    About us
    WHO WE ARE?
    We have been engaged for many years in the line of eBay and our corporation is established for the purpose of trustworthiness.
    WHAT WE HAVE?
    We have office in Shenzhen,China and 2 warehouses that are located in HongKong and US.We assure you not only good service but also to be ship as soon as possible.
    Contact us
    We are committed to your satisfaction after your purchase.
    If you are not satisfied with your purchase in any way please
    give us an opportunity to try
    and make it right before leaving feedback.We will answer your questions within 1 working days.
    Customer Service Hours: M-F: 9:30AM - 18:00PM BST (Beijing Standard Time)